Retur gratuit Contactor RTIe-5200 200A 230V/AC3 Iek

Descriere

Descriere produs

Electromagnetic contactors of KTIe series are intended for use in control circuits for start and stoppage of 3-phase squirrel-cage induction motors supplied from mains with rated voltage up to 660 V, and also can be used for switching on/off other electrical units: lighting, heating devices, various inductive loads. Used with fans, pumps, furnaces, beam cranes and automatic load transfer systems.High switching endurance.Low noise.Economical solution.Simplicity of design.Rated control supply voltage Us at AC 50HZ: 230Rated control supply voltage Us at DC: -Rated operation current Ie , 400 V: 200Connection type auxiliary circuit: EV008864Number of auxiliary contacts as normally closed contact: 0Number of auxiliary contacts as normally open contact: 1Nominal operating AC voltage Ue: 230…400Rated insulation voltage Ui: 1000Rated surge voltage: 8Conditional heat current Ith at AC-1: 275Nominal powet at AC-3 230V: 55.0Nominal powet at AC-3 400V: 110.0Max short-term load: 1500Conventional Short Circuit Current Inc: 10000Overcurrent Protection – Fuse gG: 315Dissipation power at Ie AC-3: 12Dissipation power at Ie AC-1: 25Tightening moment: 10Double bus – each size: 25x3Screw diameter metrical: 10Control voltage ranges at actuation Uc: 0,85…1,1Flexible cable without tip: 95…150Control voltage ranges at release Uc: 0,35…0,55Hard cable without tip: 95…150Closing Response Time: 20…35Response time at opening: 7…15Switching wear and tear during AC-3: 0,5Mechanical wear resistance: 0.7Ambient temperature: -45…+55Width: 168.5Height: 174.0Additional terminal – Nominal voltage Un AC: 690Additional terminal – Nominal insulation voltage Ui: 690Additional terminal – Thermal resistance current In: 10Additional terminal – Overcurrent protection – pre-ocher gG: 10Additional terminal – Max short-term load: 100Additional terminal – Insulation resistance: 10Voltage type for actuating: EV000460Number of auxiliary contacts as normally closed contact, delayed switching: 0Number of auxiliary contacts as normally open contact, leading: 0Number of auxiliary contacts as change-over contact: 0Number of poles: 3Repeated-short mode: 120Additional terminal – Section of connected conductors: 1…4Additional terminal – Tightening torque: 0.8